Cutting Board Oil: (2oz)
Bumblechute's Hydrating Wood Serum is a food-safe wood oil made with fractionated coconut oil, vitamin E, lemon oil, and non-nano zinc oxide. It's petroleum-free and contains no wax, so it soaks deep into the grain and hydrates dry wood. It goes on clear and smooth, stays liquid, and brings out rich color in walnut, maple, and oak. Apply a generous coat, let it soak in for 15 to 20 minutes, then wipe off the excess. Use two coats for more depth and color.
Wood Wax: (1oz tin)
Bumblechute's All-In-One Wood Conditioner is a soft paste made with USA-sourced beeswax, organic carnauba wax, vitamin E oil, zinc oxide, and lemon oil. It's free of mineral oil and solvents, and a little goes a long way. You can use it on its own or after a coat of the Cutting Board Oil. It seals in moisture, adds protection from water, and leaves a silky smooth finish. Apply a thin layer, let it dry for 20 to 30 minutes, then buff with a rag.
Oil + Wax Pack:
Both products together for complete board care. Apply the Cutting Board Oil first to hydrate the wood, then follow with the Wood Wax to seal and protect. This is the same finish I use on every board I make.
Cutting Board Oil: (2oz)
Bumblechute's Hydrating Wood Serum is a food-safe wood oil made with fractionated coconut oil, vitamin E, lemon oil, and non-nano zinc oxide. It's petroleum-free and contains no wax, so it soaks deep into the grain and hydrates dry wood. It goes on clear and smooth, stays liquid, and brings out rich color in walnut, maple, and oak. Apply a generous coat, let it soak in for 15 to 20 minutes, then wipe off the excess. Use two coats for more depth and color.
Wood Wax: (1oz tin)
Bumblechute's All-In-One Wood Conditioner is a soft paste made with USA-sourced beeswax, organic carnauba wax, vitamin E oil, zinc oxide, and lemon oil. It's free of mineral oil and solvents, and a little goes a long way. You can use it on its own or after a coat of the Cutting Board Oil. It seals in moisture, adds protection from water, and leaves a silky smooth finish. Apply a thin layer, let it dry for 20 to 30 minutes, then buff with a rag.
Oil + Wax Pack:
Both products together for complete board care. Apply the Cutting Board Oil first to hydrate the wood, then follow with the Wood Wax to seal and protect. This is the same finish I use on every board I make.
